 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CM400HA-34H Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Single IGBTMODTM H-Series Module 400 Amperes/1700 Volts A B R - M4 THD (2 TYP.) N Q - DIA. (4 TYP.) E J H A B H G E C P - M8 THD (2 TYP.) G M F L D K M E C Description: Powerex IGBTMODTM Modules are designed for use in switching applications. Each module consists of one IGBT Transistor in a single configuration with a reverseconnected super-fast recovery free-wheel diode. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management. Features: Low Drive Power Low VCE(sat) Discrete Super-Fast Recovery Free-Wheel Diode High Frequency Operation (20-25kHz) Isolated Baseplate for Easy Heat Sinking Applications: AC Motor Control Auxilliary Inverter for Traction UPS Welding Power Supplies Laser Power Supplies Ordering Information: Example: Select the complete part module number you desire from the table below -i.e. CM400HA-34H is a 1700V (VCES), 400 Ampere Single IGBTMODTM Power Module. Type CM Current Rating Amperes 400 VCES Volts (x 50) 34 E E G C Outline Drawing and Circuit Diagram Dimensions A B C D E F G H Inches 4.49 3.660.01 Millimeters 114.0 93.00.25 Dimensions J K L M N P Q R Inches 0.71 0.57 0.43 0.41 0.35 M8 Metric 0.26 Dia. M4 Metric Millimeters 18.0 14.5 11.0 10.5 9.0 M8 Dia. 6.5 M4 1.50+0.04/-0.02 38.0+1.0/-0.5 1.26 32.0 1.18+0.04/-0.02 30.0+1.0/-0.5 1.02 1.0 0.83 26.0 25.5 21.0 219 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM400HA-34H Single IGBTMODTM H-Series Module 400 Amperes/1700 Volts Absolute Maximum Ratings, Tj = 25 C unless otherwise specified Ratings Junction Temperature Storage Temperature Collector-Emitter Voltage (G-E SHORT) Gate-Emitter Voltage Collector Current Peak Collector Current Diode Forward Current Diode Forward Surge Current Power Dissipation Max. Mounting Torque M8 Terminal Screws Max. Mounting Torque M6 Mounting Screws Max. Mounting Torque M4 G-E Terminal Screw Module Weight (Typical) V Isolation * Pulse width and repetition rate should be such that device junction temperature does not exceed the device rating. Symbol Tj Tstg VCES VGES IC ICM IF IFM Pd - - - - VRMS CM400HA-34H -40 to +150 -40 to +125 1700 20 400 800* 400 800* 4100 95 26 13 980 4000 Units C C Volts Volts Amperes Amperes Amperes Amperes Watts in-lb in-lb in-lb Grams Volts Static Electrical Characteristics, Tj = 25 C unless otherwise specified Characteristics Collector-Cutoff Current Gate Leakage Current Gate-Emitter Threshold Voltage Collector-Emitter Saturation Voltage Symbol ICES IGES VGE(th) VCE(sat) QG VFM Test Conditions VCE = VCES, VGE = 0V VGE = VGES, VCE = 0V IC = 40mA, VCE = 10V IC = 400A, VGE = 15V IC = 400A, VGE = 15V, Tj = 150C Total Gate Charge Diode Forward Voltage VCC = 750V, IC = 400A, VGS = 15V IE = 400A, VGS = 0V Min. - - 4.5 - - - - Typ. - - 6.0 2.7 - 2900 - Max. 4 0.5 7.5 3.7** -* - 3.4 Units mA A Volts Volts Volts nC Volts ** Pulse width and repetition rate should be such that device junction temperature rise is negligible. Dynamic Electrical Characteristics, Tj = 25 C unless otherwise specified Characteristics Input Capacitance Output Capacitance Reverse Transfer Capacitance Resistive Load Switching Times Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Symbol Cies Coes Cres td(on) tr td(off) tf trr Qrr IE = 600A, diE/dt = -800A/s IE = 600A, diE/dt = -800A/s VCC = 750V, IC = 400A, VGE1 = VGE2 = 15V, RG = 10 VGE = 0V, VCE = 10V Test Conditions Min. - - - - - - - - - Typ. - - - - - - - - 7.0 Max. 85 20 15 900 1500 1500 800 400 - Units nF nF nF ns ns ns ns ns Diode Reverse Recovery Time Diode Reverse Recovery Charge C Thermal and Mechanical Characteristics, Tj = 25 C unless otherwise specified Characteristics Thermal Resistance, Junction to Case Thermal Resistance, Junction to Case Contact Thermal Resistance Symbol Rth(j-c) Rth(j-c) Rth(c-f) Test Conditions Per IGBT Per FWDi Per Module, Thermal Grease Applied Min. - - - Typ. - - - Max. 0.030 0.060 0.023 Units C/W C/W C/W 220 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM400HA-34H Single IGBTMODTM H-Series Module 400 Amperes/1700 Volts OUTPUT CHARACTERISTICS (TYPICAL) OUTPUT CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) 800 Tj = 25C VGE = 20V IC, (AMPERES) 15 12 800 VCE = 10V Tj = 25C Tj = 125C 5 VGE = 15V Tj = 25C Tj = 125C 640 640 11 IC, (AMPERES) 4 VCE(sat), (VOLTS) 10 480 480 3 320 9 8 0 0 2 4 6 8 10 VCE, (VOLTS) 320 2 160 160 1 0 0 4 8 12 16 20 VGE, (VOLTS) 0 0 160 320 480 640 800 IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) CAPACITANCE VS. VCE (TYPICAL) 10 103 Tj = 25C CAPACITANCE, Cies, Coes, Cres, (nF) 103 8 VCE(sat), (VOLTS) IC = 800A IE, (AMPERES) 102 Cies 6 IC = 400A 102 4 101 VGE = 0V Coes Cres 2 IC = 160A 0 0 4 8 12 16 20 VGE, (VOLTS) 101 0 1 2 VEC, (VOLTS) 3 4 100 10-1 100 VCE, (VOLTS) 101 102 HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) REVERSE RECOVERY CHARACTERISTICS (TYPICAL) REVERSE RECOVERY CURRENT, Irr, (AMPERES) GATE CHARGE, VGE 104 REVERSE RECOVERY TIME, t rr, (ns) 103 VCC = 750V VGE = 15V RG = 10 Tj = 125C td(off) 103 20 GATE-EMITTER VOLTAGE, VGE, (VOLTS) IC = 400A 16 VCC = 500V VCC = 750V SWITCHING TIME, (ns) trr 12 103 tf t d(on) 102 Irr 102 8 tr di/dt = -800A/sec Tj = 25C 4 102 101 102 COLLECTOR CURRENT IC, (AMPERES) 103 101 101 102 EMITTER CURRENT, IE, (AMPERES) 101 103 0 0 0.8 1.6 2.4 3.2 4.0 GATE CHARGE, QG, (C) 221 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CM400HA-34H Single IGBTMODTM H-Series Module 400 Amperes/1700 Volts NORMALIZED TRANSIENT THERMAL IMPEDANCE, Z th(j-c) Zth = Rth * (NORMALIZED VALUE) 100 Single Pulse TC = 25C Per Unit Base = R th(j-c) = 0.03C/W NORMALIZED TRANSIENT THERMAL IMPEDANCE, Z th(j-c) Zth = Rth * (NORMALIZED VALUE) 10-3 101 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT) 10-2 10-1 100 101 10-3 101 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi) 10-2 10-1 100 101 100 Single Pulse TC = 25C Per Unit Base = R th(j-c) = 0.06C/W 10-1 10-1 10-1 10-1 10-2 10-2 10-2 10-2 10-3 10-5 TIME, (s) 10-4 10-3 10-3 10-3 10-5 TIME, (s) 10-4 10-3 10-3 222 |
Price & Availability of CM400HA-34H
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |